Who we work with
VAND SOLUTIONS WORKS WITH A long list of manufacturers AND REPRESENTATIVES TO HELP YOU FIND THE PERFECT SOLUTION FOR YOUR PROJECT.
Take a look below and give us a call to discuss a solution perfect for your project.
TRITON, AIRE-02 ARGOS SBR, TRI-OVAL
Aire-O2 Triton Process Aerator and Mixer units were designed to combine wide-dispersion, fine bubble aeration with industry-leading mixing capabilities, providing an effective means of re-suspending and moving solids. Creating controlled mixing patterns to minimize short-circuiting. If your aeration system goes down, is unpredictable, or is ready for an upgrade, Aeration Industries Aire-O2 Triton® Process Aerator/Mixer can be shipped anywhere in the continental US in as little as 24 hours! Slip it in, turn it on, and your problem is solved; often in less time than repairing your old system and at a fraction of the cost for replacement. Aeration Industries equipment is simple to install and maintain, without draining your basin! Rental fees can be applied to purchase, so once it is installed, repairing or replacing your old system may no longer be necessary. Expertise and reliable equipment to provide a full range of wastewater and aeration treatment solutions to optimize municipal, industrial, and aquaculture applications.
VAPEX ENVIRONMENTAL TECHNOLOGIES
ODOR CONTROL FOR CONFINED SPACES
Radical Odor Control Technology is a vapor phase treatment that treats odors, remediates surface fats, oils, and grease and mitigates microbial induced corrosion. The centerpiece of the Vapex technology is the patented three-fluid nozzle that produces less than 5 micron-sized water particles. The water particles combine with ozone, a strong oxidant, to produce the second most powerful oxidant known – the hydroxyl radical. The high oxidation potential of hydroxyl radicals lessens the need to generate a large amount of ozone, consequently, the units are small in size, energy efficient, and highly effective in oxidizing odorous compounds including sulfur compounds (Hydrogen sulfide, dimethyl sulfide, Methyl mercaptan, etc.), nitrogen compounds (Ammonia, Methylamine, Indole, Skatole, etc.), and aldehydes (Acetaldehyde, Butryaldehyde, etc.). The unit treats odors in the space where the odors are generated. Consequently, there is no need to transport, treat, and positively expel air into the atmosphere. Furthermore, since Radical Odor Control Technology needs only air, electricity and water to generate the oxidants there is no need for costly chemicals addition or replenishment.
SCREENING AND GRIT REMOVAL EQUIPMENT FOR MUNICIPAL AND INDUSTRIAL WATER AND WASTEWATER FACILITIES
Hydro-Dyne Engineering, Inc. is a leading manufacturer of screening and grit removal equipment for municipal and industrial water and wastewater facilities. They are the only manufacturers that own their own patents and performs all equipment design, fabrication, assembly and testing in-house.
SCREW CONVEYOR, BELT CONVEYOR, DRAG CONVEYOR, BUCKET ELEVATORS, SLIDE GATES, SCREW FEEDERS & LIVE BOTTOMS
KWS Manufacturing is a leader in the design and manufacture of conveying equipment for the bulk material handling industry. Dedicated to providing the highest quality equipment and service to their customers. KWS products are marketed globally and their primary customers are end users, power transmission distributors, engineering firms, system suppliers and original equipment manufacturers (OEMs). Their corporate office and manufacturing facilities are located in Burleson, Texas and continuously expanding its manufacturing abilities. KWS is an ISO 9001-2008 certified manufacturer committed to customer satisfaction and continuous improvement of their products and services. Specializing in the engineering of Screw Conveyor, Belt Conveyor, Drag Conveyor, Bucket Elevators, Slide Gates, Screw Feeders & Live Bottoms.
HEARTLAND PUMP AND PROCESS
SCREW CONVEYOR, BELT CONVEYOR, DRAG CONVEYOR, BUCKET ELEVATORS, SLIDE GATES, SCREW FEEDERS & LIVE BOTTOMS
Heartland Pump and Process is a chemical feed systems specialist for in custom-engineered chemical feed systems, from a simple pump to a fully outfitted turnkey pump house. Wether you are looking for a simple low tech solution or a high tech solution Heartland Pump and Process can deliver a system that ensures chemical feed in precisely the right amount, every time. They have decades of experience in power plants, steel mills, paper mills, food plants, chemical plants, refineries, cooling towers and other applications where chemicals are used to treat water. Heartland has the experience to identify your feed problems on-site. They combine their in-plant experience with state-of-the art electronics and proven quality components to create custom engineered systems.
CHOPPER PUMPS, AXIAL/RECIRCULATION PUMPS, GASMIX, BIOMOVER, POWERMIX, SUBMERSIBLE MIXERS, VENTURI AIRJET, BIOCHOP
Landia supplies pumping and mixing solutions to many different industries, with the most important ones being agriculture, wastewater, biogas plants and the fish industry. In general, you will find Landia's products wherever there is a difficult medium to be pumped or mixed. Chopper Pumps, Axial/Recirculation Pumps, GasMix, BioMover, PowerMix, Submersible Mixers, Venturi AirJet, and BioChop.
UF, NF, RO, MF, MBR, Ion Exchange, pressure & Gravity filters
Wigen Water Technologies® has grown to become a leading OEM of custom water treatment systems, specializing in application-specific, cost-effective and reliable solutions for industrial, municipal and ultrapure clients. Our products include a variety of state-of-the-art technologies, expertly designed to meet each client’s specific needs. From primary filtration to distribution and recycling
CERAMEM® CERAMIC MEMBRANES (INDUSTRIAL)
Veolia is known for its patented CeraMem® Ceramic Membranes which is a standardized system specifically for the industrial laundry market. Veolia launched its first system in 1991. Based on CeraMem® Ceramic Membrane Technology, the system is effective in removing oil & grease, grit, and other solids while producing clean water for reuse. This system addresses surcharges for water usage and disposal costs from Public Owned Treatment Works (POTW) as well as conservation in water scarce environments. CeraMem® ceramic membranes are a proprietary technology platform that combines innovative design features and unique materials of construction to provide ceramic membrane modules at costs comparable to polymeric membranes. This technology is offered by Veolia Water Technologies that provides superior performance in a variety of industrial applications. The design, which is a combination of proprietary materials of construction and unique membrane chemistry, allows the utilization of large-diameter ceramic monolith membranes that reduce the overall footprint of installed equipment in harsh operating environments unsuitable for conventional membrane products.
SLUICE GATE, SLIDE GATE, STOP LOG ASSEMBLIES, STOP GATES, FLAPGATES, TELESCOPIC VALVES, MUD VALVES, AND SHEAR GATES
RW Gate Company designs and manufactures the highest quality, longest lasting water control gates and related equipment used in the water/wastewater industry and others employing water control systems. RW Gate Company is a professional organization that works within a defined quality management system and is ISO 9001:2008 certified. Formed around a team of individuals with decades of combined experience in the water/wastewater industry with a high level of professional expertise and senior management experience. This team guides their commitment to customer satisfaction among all those involved in the project chain; from product specification through installation and maintenance. The company’s headquarters are at the 16-acre Ross Technology Park in Troy, NY – housing our team of professionals who are deeply experienced in all facets of the water control gate industry.
MOINEAU PROGRESSIVE CAVITY PUMPS
PCM has acquired incomparable knowledge in a wide range of industries. Our expertise in fluid properties and behaviors has been serving our customers challenges of Oil & Gas, Food, Cosmetic & Pharmaceutical Industry markets. PCM EcoMoineau is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with a highly modular, eco-friendly design.
Fibracast is a global leader in the research, development, and manufacturing of advanced membrane technologies for water and wastewater treatment. They created the next generation of membrane filtration technology that would improve on the robustness, performance and operational flexibility of existing membrane designs. FibrePlate™ hybrid-membranes represent the evolution of membrane technology, combining the best properties of hollow-fiber and flat-sheet membrane technologies. The result is an extremely robust membrane with superior backwash capability and excellent hydraulics. Air is supplied from the bottom of the membrane cassette to help keep the membrane surface free of debris build-up. The unique design and orientation of the FibrePlate™ system maximizes the flow and mixing of mixed liquor in the process train. Preventing sludge and fibrous material build-up on the membrane surface is critical. In addition to the optimized membrane orientation, the air creates a beneficial vibration of the membrane plates which further reduces debris settling. Due to its innovative design, the FibrePlate™ membrane sets a new standard for packing density which results in facility footprints nearly half the size of hollow-fiber based facilities and even smaller over flat sheet membrane systems. The result is significantly reduced capital and operating costs.
JOHN MEUNIER INC.
John Meunier Inc., founded in 1948 by John Meunier, is a leader in equipment and technologies for both water and wastewater treatment and management. As a manufacturing company, our highly qualified specialists perform precise diagnoses which will determine the most suitable design conditions, equipment selection and fabrication best suited to meet our client's needs. Our mission is to continue to supply municipal and industrial clients with global solutions for water and wastewater treatment. By being part of the Veolia Group, John Meunier Inc. can provide a wide range of products and services.
CLARIFIERS, GRAVITY SLUDGE THICKENER, CLEARFLO SBR, CLEARFLO CONTINIOUS LOOP REACTOR, DIGESTER, CLEARFLO JET AERATION
Providing Clarifiers, Gravity Sludge Thickener, ClearFlo SBR, ClearFlo Continuous Loop Reactor, Digester, ClearFlo Jet Aerationutilizes using cutting edge analysis and design technologies to custom design each piece of process equipment to meet each individual customer's needs. All equipment is analyzed using advanced computational fluid dynamic (CFD), finite element analysis (FEA) and civil/structural software codes, to ensure process performance and structural integrity. All mechanisms are fully designed in a 3-D CAD environment to produce the highest quality, and customer friendly designs possible.
ACTIFLO, ACTILFO CARB, BIOACTIFLO, DISCFILTER, MBR, MBBR, IFAS, HYBAS, ANITA MOX, BIOCON, SOLIA, BIOSTYR, THP, ODOWATCH, OXIDATION DITCH, STAMO AGITATIOR
Kruger Addresses the diverse water, wastewater and biosolids treatment needs of municipalities around the world with market-leading technologies and processes. We provide premium quality services and solutions to municipal water, wastewater and biosolids customers, in both urban and rural settings. Whether the challenge relates to scarce water resources, health concerns, or meeting stringent environmental regulations, municipal authorities throughout the world rely on our water treatment expertise. Known process treatment by name: ACTIFLO, ACTILFO Carb, BioACTIFLO, Discfilter, MBR, MBBR, IFAS, Hybas, ANITA Mox, BioCon, SOLIA, BIOSTYR, THP, OdoWatch, Oxidation Ditch, Stamo Agitatior, Struvia.
Cerlic Environmental Control Inc creates high quality self-cleaning optical sensors to Water Treatment Plants, Waste Water Treatment Plants, and Other Industries. They carry the TriOS line that provides optical solutions for measuring NO2, NO3, Oil-in-Water, and other additional parameters.
FKC screw press
An FKC screw press can be used in a variety of liquid-solid separation, or dewatering applications. An FKC screw press can be used in the same applications where belt presses, centrifuges, and filter presses have traditionally been used, as well as in more traditional screw press applications such as those in the pulp & paper industry. FKC custom designs and manufactures screw presses from 100 mm (4") to 1500 mm (59") in diameter, with wetted lengths up to 9 meters (30'). Dewatering with the Screw Press is simple and continuous. Gravity assists the drainage at the inlet end of the screw and then reduces the volume as the materials is moved from the inlet to the discharge end of the screw press. Proper screw design is critical, as different materials require different screw speeds, screw configurations, and screens in order to dewater to a high outlet consistency while maintaining an excellent capture rate.
Pieralisi solutions cover both the dynamic pre-thickening of sludge, usually before an anaerobic digestion, and the dewatering previous to disposal. In addition, Pieralisi Group is able to "finalize" the cycle of sludge, offering thermal drying technologies to be able to reduce the problem of sludge volume of over 98%, with consequent and proportional reduction of disposal costs. With more than 50 years of experience in centrifugal technologies, the group offers customized service with plants that produce energy from Manure and biogas and alternative energy production from biomass. Today Pieralisi technology is widely applied in plants that produce energy from Manure (biogas) and alternative energy production from biomass, and, in this industry, with more than 50 years of experience in centrifugal technologies, the Group is able to offer its customers customized solutions that satisfy the individual and particular needs.
TUBE air diffusers, dehydrators
Tube air diffusers were developed for application in municipal and industrial wastewater treatment plants. They are predominantly used for supplying the wastewater in the aeration tank with oxygen as well as for providing the efficient mixing of the aeration tank content with low power consumption.
Dehydrators are intended for mechanical dewatering of industrial and municipal wastewater sludge. They are recommended for wastewater sludge dewatering on low-capacity municipal wastewater facilities, as well as for food, pulp-and-paper, textile, chemical, oil-refining and similar industries.
Thickeners, Dehydrators, DAF
One of the leading providers of wastewater treatment, biosolids dewatering and nutrient recovery solutions. We develop custom solutions and turnkey systems for wastewater and sludge treatment as well as biosolids dewatering and focus in particular on the municipal, industrial and agriculture sector. Whether starting from the beginning developing an innovative overall solution or developing a solution that will work better within an already existing process, Trident has helped many customers and is regarded as one of the leading resources for biosolids dewatering and nutrient recovery solutions.
Closed Circuit Reverse Osmosis (CCRO™) systems are rapidly replacing traditional water purification methods, including reverse osmosis — the decades-old standard solution for industrial water purification, reuse and desalination. Reverse Osmosis is a mature technology that is sensitive, limited in its efficiency and has reached its limits.
high solids anaerobic digestion
Anaergia delivers innovative, proprietary, cost effective, environmentally friendly, and proven solutions that are setting new global benchmarks. The Anaergia approach maximizes recovery and recycling of plastics, papers, and metals, before recovering biodegradable organic material for conversion to energy and fertilizer. A small portion of the reject material is transformed into a sustainable refuse derived fuel (RDF). Anaergia provides robust, cutting-edge, and economically viable solutions for organics recovery from diverse waste sources. Unlike traditional approaches, our solutions recover 90% of organics without limitations on in-feed contamination levels. The recovered organic material is a nutrient rich feed for anaerobic digestion, and can be used in co-digestion plants to increase biogas production.
LOOKING FOR A SOLUTION FOR YOUR PROJECT?
Vand SolutionS can help! Please give us a call and let's talk about your water and wastewater project needs. We would love to connect with you and talk about your needs.